Custom Cricket Kits, Whites and Coloured
Two formats, one supplier. Sublimated coloured kits for limited-overs, crisp poly-viscose whites that hold a press for the longer game, and the sweaters, caps and training layers that go with both.
- 20
- pieces per design
- Minimum order
- 15–20
- working days
- Bulk lead time
- 7–10
- working days
- Sampling
- 4
- export markets
- Shipping to
Both formats.
One standard.
Coloured kit for the T20 and 50-over game, whites for the longer format, and everything around them — matched to a single club identity rather than assembled from two suppliers.
- Coloured
- Trousers
- Whites
- Flannels
- Sweater
- Headwear
- Training
- Base
- Rain
- Bag
The Full Cricket Range
Everything a cricket squad wears, built to one colour standard so the whole range matches season after season.
Coloured Match ShirtSublimated limited-overs shirt, short or long sleeve, with player name and number to competition specification.
Coloured TrousersMatching limited-overs trousers with a drawcord waist and room over a thigh guard.
Whites — Match ShirtPoly-viscose twill shirt, long or short sleeve, with a soft collar and a buttoned placket.
Whites — TrousersCream or optic white twill trousers, cut with a wider thigh to clear pads and a thigh guard.
Sweater & SlipoverAcrylic cable knit in cream with club tipping at the V-neck and cuffs. Long sleeve or sleeveless.
Cap & Wide-Brim HatBaggy-style cap and a wide-brim sun hat, both with an embroidered club crest.
Training TeeLightweight breathable tee for nets and fielding drills.
Base LayerCompression long-sleeve for cold mornings, in a colour that matches the shirt sleeve.
Rain Jacket & TracksuitShell jacket and travel tracksuit for the long list of rain-affected fixtures.
Cricket Kit BagWheeled or duffel, sized for a full bag of pads, bats, gloves and helmet, with a wet pocket.
Customisation Options
Every decoration method below runs in our own factory, so we can mix them on one garment without shipping it out and adding a week to your lead time.
Sublimation Printing
Used for all coloured limited-overs kit — club colours, sponsor panels, player names and numbers built into the fabric so nothing peels after a season in the sun.
Embroidery
The traditional choice for whites, caps, sweaters and blazers. A club crest embroidered onto a poly-viscose shirt looks correct in a way a print does not.
DTF Transfer
For names, numbers and sponsor additions on coloured kit after make-up — useful for late squad changes mid-season.
Screen Printing
Economical for large runs of simple supporter, tour and event tees.
Woven Labels & Trims
Neck labels, sweater tipping and care labels in your own branding, for clubs and private-label brands alike.
Design it yourself in the Kit Builder
Coming soonPick a template, drop in your colours and crest, and see the kit rendered before you commit. Save the design and send it straight through as a quote request.
Fabric selection
Every Fabric We Run for Cricket
Not a highlight reel — this is the full working list, including the trims and secondary materials that decide whether a kit survives a season. Weights are the ranges we actually run; the exact specification is fixed at sampling.
Only polyester can be sublimated — and it must start white
Dye sublimation bonds ink into polyester fibres, so it cannot be used on cotton, on nylon, or on fabric that has already been dyed dark. If your design needs all-over colour, stripes, hoops or gradients, it has to be built on one of the sublimation-ready knits below. Everything else is decorated by embroidery, transfer or screen print instead. Fabrics are tagged accordingly.
Coloured limited-overs kit
5 optionsKnitted polyester, sublimation-ready. Everything here can carry full-colour club branding printed into the fibre.
SubBird's Eye / Honeycomb Mesh
135–155 gsm
The classic team jersey knit — our most-ordered fabric
SubInterlock Polyester
140–165 gsm
Premium jerseys and designs with fine detail or gradients
SubMicro Mesh / Pin-hole
115–140 gsm
Ventilation panels and full kits for hot climates
SubPoly-Spandex (4-way stretch)
175–200 gsm
Pro/slim-fit jerseys, base layers and compression
SubPoly Tricot (Warp Knit)
150–170 gsm
Shorts and training pants
Whites & sweaters
2 optionsWoven and heavy-knit, and deliberately NOT sublimatable — whites are decorated by embroidery. This is the group most suppliers leave out.
Poly-Viscose Cricket Twill
180–220 gsm
Cricket whites — trousers and long-sleeve shirts
Acrylic Cable Sweater Knit
380–420 gsm
Cricket sweaters and sleeveless slipovers
Training & mid-layer
3 optionsWarmer constructions for midweek sessions and the walk out. Decorated by embroidery or transfer rather than all-over print.
SubBrushed Poly Fleece
240–280 gsm
Quarter-zip drill tops and warm-up layers
French Terry (poly-cotton)
280–320 gsm
Club hoodies, crew sweats and travel wear
SubTricot, Brushed Back
200–230 gsm
Training pants and tracksuit bottoms
Outerwear
3 optionsWeather layers for the bench and travel. Woven, not knitted — so decoration is embroidery or heat transfer only.
Ripstop Shell
80–110 gsm
Rain jackets and packable shells
Bonded Softshell
260–300 gsm
Technical bench and staff jackets
Quilted Wadding & Taffeta
100–200 gsm fill
Bench coats and cold-weather outerwear
Trims & secondary materials
4 optionsEasy to overlook, and the first things to fail on a cheap kit. Specified on every order, not treated as an afterthought.
1×1 Rib Knit
220–260 gsm
Collars, cuffs and hem bands
Mesh Lining
60–80 gsm
Short and jacket linings, inner briefs
EVA Foam Padding
3–6 mm
Goalkeeper and contact-sport protective panels
Elastic Waistband Tape
30–40 mm wide
Shorts and training pant waistbands
Sustainable option
1 optionPerformance identical to virgin polyester. Increasingly required by European buyers who must evidence their supply chain.
SubRecycled rPET Interlock
140–165 gsm
Clubs and brands with a sustainability commitment to document
Full technical specification — all 18 materials
| Material | Group | Weight | Properties | Best for | Sublimation |
|---|---|---|---|---|---|
| Bird's Eye / Honeycomb Mesh | Coloured limited-overs kit | 135–155 gsm | Textured pin-hole knit, high airflow, hides creasing | The classic team jersey knit — our most-ordered fabric | Yes |
| Interlock Polyester | Coloured limited-overs kit | 140–165 gsm | Smooth double-knit, identical both faces, sharpest print clarity | Premium jerseys and designs with fine detail or gradients | Yes |
| Micro Mesh / Pin-hole | Coloured limited-overs kit | 115–140 gsm | Open perforated structure, maximum ventilation, very light | Ventilation panels and full kits for hot climates | Yes |
| Poly-Spandex (4-way stretch) | Coloured limited-overs kit | 175–200 gsm | Four-way stretch with shape recovery, close body fit | Pro/slim-fit jerseys, base layers and compression | Yes |
| Poly Tricot (Warp Knit) | Coloured limited-overs kit | 150–170 gsm | Fine vertical ribs, matte face, excellent drape, run-resistant | Shorts and training pants | Yes |
| Poly-Viscose Cricket Twill | Whites & sweaters | 180–220 gsm | Crisp twill weave, holds a press, resists grass staining | Cricket whites — trousers and long-sleeve shirts | No |
| Acrylic Cable Sweater Knit | Whites & sweaters | 380–420 gsm | Chunky cable knit, warm, machine washable | Cricket sweaters and sleeveless slipovers | No |
| Brushed Poly Fleece | Training & mid-layer | 240–280 gsm | Raised brushed nap inside, smooth knit face, warm and light | Quarter-zip drill tops and warm-up layers | Yes |
| French Terry (poly-cotton) | Training & mid-layer | 280–320 gsm | Looped inner face, stable, soft, holds shape | Club hoodies, crew sweats and travel wear | No |
| Tricot, Brushed Back | Training & mid-layer | 200–230 gsm | Smooth outer face with a brushed reverse for warmth | Training pants and tracksuit bottoms | Yes |
| Ripstop Shell | Outerwear | 80–110 gsm | Wind and water resistant, tear-resistant grid, packs small | Rain jackets and packable shells | No |
| Bonded Softshell | Outerwear | 260–300 gsm | Woven face bonded to fleece backing, wind-blocking, structured | Technical bench and staff jackets | No |
| Quilted Wadding & Taffeta | Outerwear | 100–200 gsm fill | Insulating polyfill quilted between shell and lining | Bench coats and cold-weather outerwear | No |
| 1×1 Rib Knit | Trims & secondary materials | 220–260 gsm | Elastic ribbed knit with strong recovery | Collars, cuffs and hem bands | No |
| Mesh Lining | Trims & secondary materials | 60–80 gsm | Fine open net, breathable, low bulk | Short and jacket linings, inner briefs | No |
| EVA Foam Padding | Trims & secondary materials | 3–6 mm | Closed-cell foam, impact absorbing, washable | Goalkeeper and contact-sport protective panels | No |
| Elastic Waistband Tape | Trims & secondary materials | 30–40 mm wide | Woven elastic with rubber threads, holds tension after washing | Shorts and training pant waistbands | No |
| Recycled rPET Interlock | Sustainable option | 140–165 gsm | Made from post-consumer bottles, GRS-certifiable, prints identically | Clubs and brands with a sustainability commitment to document | Yes |
Need something not listed? We source to specification. Browse the full fabric library or send us a swatch to match.
Sizing Charts
Garment measurements, taken flat, in centimetres. If you are ordering for a squad you have not measured, request a size set first — it costs far less than re-running a production batch.
Adult shirt
cm| Size | Chest | Length |
|---|---|---|
| S | 52 | 72 |
| M | 55 | 74 |
| L | 58 | 76 |
| XL | 61 | 78 |
| 2XL | 64 | 80 |
| 3XL | 67 | 82 |
Garment measured flat. Cricket shirts are cut fuller than football jerseys to allow a free bowling arm.
Youth shirt
cm| Size | Chest | Length |
|---|---|---|
| 5–6y | 35 | 47 |
| 7–8y | 38 | 52 |
| 9–10y | 41 | 57 |
| 11–12y | 44 | 62 |
| 13–14y | 47 | 67 |
Sized by age band for junior and academy sides. Request a size set before a full colts run.
Adult trousers
cm| Size | Waist | Length |
|---|---|---|
| S | 38 | 104 |
| M | 41 | 106 |
| L | 44 | 108 |
| XL | 47 | 110 |
| 2XL | 50 | 112 |
Waist is relaxed flat, doubled. Inside leg is finished long so it can be hemmed to the player.
Get it right first time
How to measure
Measure a garment the squad already wears and compare it to the tables above — it is far more reliable than measuring bodies.
- A
- ChestMeasure flat, 2.5 cm below the armhole, seam to seam. Double it for the full circumference.
- B
- Body lengthFrom the highest point of the shoulder straight down to the hem.
- C
- SleeveFrom the shoulder seam to the sleeve opening.
From Brief to Finished Kit
Every stage happens in our own factory. That is what makes a reorder in January match the kit you approved in August.
1Design & Development
Your artwork or ours. We return a digital mock-up of every garment in the range before anything is cut.
2Pattern & Cut
Graded patterns per size, laid and cut in-house for consistent fit across the whole squad.
3Print & Embroidery
Sublimation, embroidery, DTF and DTG all run under our own roof — no third party, no extra week.
4Sewing
Flatlock and coverstitch construction, with bar tacks at the stress points that fail first.
5Quality Control
Every piece measured and inspected against your approved sample before it is packed.
6Packing & Dispatch
Bagged and labelled per player or per size, then shipped with landed cost confirmed up front.
Detail & Finish
Close up on the construction that decides whether a kit still looks right at the end of the season.
Sublimated colour, sharp edges
Whites that hold a press
Cable knit, club tipping
Nets and travel layers
ICC Clothing & Equipment Regulations
Cricket Kit Rules We Build To
Cricket has the most detailed logo and clothing rules of any sport we manufacture for, and they differ by format and by competition. These are the constraints that most often catch clubs out.
- Whites for the long format
- Test and first-class cricket require predominantly white or cream clothing. Coloured clothing is for limited-overs only. A club playing both formats needs two distinct kits — there is no single garment that satisfies both.
- Commercial logo area is capped
- The ICC regulations limit the size and number of commercial logos on shirts and sweaters, with defined chest, sleeve and non-commercial areas. Adding a fourth sponsor to a shirt is often the thing that makes a kit non-compliant.
- Trousers carry almost nothing
- Logos on playing trousers are tightly restricted, typically to manufacturer identification only. Club sponsors that appear on the shirt usually cannot be repeated on the leg.
- Names and numbers on limited-overs kit
- Limited-overs shirts generally carry the player name and number on the back to specified heights. We build these into the sublimation rather than applying them afterwards, so they cannot lift.
- No political or religious messaging
- As in most codes, slogans and messages of a political, religious or personal nature are prohibited on playing clothing. Memorial and charity marks normally require prior approval from the competition.
Rules change and competitions add their own. Send your competition handbook with the brief and we will lay the artwork out inside its limits — a routine part of our design step, not an extra.
Custom cricket manufacturing, in detail
Addahar Enterprises manufactures complete custom cricket kits for clubs, schools, academies, leagues and distributors. Cricket is unusual among the sports we supply because most clubs need two entirely different kits: sublimated coloured clothing for the limited-overs game, and traditional whites for the longer format.
Those two need different fabrics and different construction. Coloured kit is knitted polyester and sublimation-printed, so club colours, sponsors and player names can be built into the garment. Whites are woven poly-viscose twill at 180–220 gsm, chosen because it takes and holds a press, resists grass staining and does not go translucent in strong sun — properties a knitted jersey simply does not have.
We supply village and league clubs, school and academy sides, franchise teams and brands producing cricket ranges under their own label. Because we cut both woven and knitted garments in the same factory, a club can order coloured kit, whites, sweaters and caps against one approved colour standard and one delivery.
OEM, ODM & Private Label
How we work with you depends on how much of the design you already own. All four routes run through the same factory and the same quality process.
Who We Make For
The garments are the same. The paperwork, pricing and process differ — pick the route that matches how you buy.
Cricket Manufacturing FAQs
The questions we are asked most often, answered straight.
Can you supply both coloured kit and whites?
Yes, and it is the main reason clubs come to us. Coloured kit is knitted polyester and sublimated; whites are woven poly-viscose twill and embroidered. We cut both in the same factory, so one order covers both formats against one approved colour standard.
Why can’t whites be sublimated?
Sublimation needs a polyester base and works by adding colour — it cannot print white onto white, and poly-viscose twill is not a sublimation substrate. Whites are therefore decorated by embroidery, which is also the traditional and expected finish.
What is the minimum order for cricket kit?
Sublimated coloured shirts start at 10 pieces per design. Whites and sweaters carry a higher minimum because they are cut-and-sew from woven cloth and knitted panels respectively.
Will your whites stay white?
Poly-viscose twill is chosen for exactly this. It resists grass staining better than cotton, holds a press, and does not go translucent in strong sun. We supply care instructions with every order because washing at too high a temperature is the usual cause of yellowing.
Can you add player names and numbers?
Yes. On coloured limited-overs kit they are sublimated into the shirt at production, to the height your competition specifies. On whites, names and numbers are applied by embroidery or transfer where the competition permits them at all.
Do you make cricket sweaters and slipovers?
Yes — acrylic cable knit in cream, long-sleeve or sleeveless, with your club colours as tipping at the V-neck and cuffs and an embroidered crest.
Do you make trousers that fit over pads and a thigh guard?
Yes. Our cricket trouser block is cut with a wider thigh and knee than a standard trouser precisely for this, and we finish the inside leg long so it can be hemmed to the individual player.
Can you produce under our own brand label?
Yes. Under private label we apply your woven neck label, sweater tipping and care labels, and pack to your specification with no Addahar branding on the garment.
How long does a cricket kit order take?
Samples in 7–10 working days from artwork approval. Bulk in 15–20 working days after sign-off; allow a little longer where an order combines woven whites and knitted coloured kit.
Do you supply league, school and franchise kit?
All three. Leagues and franchises usually work from a tech pack with defined sponsor areas; clubs and schools more often start from a description or a photo of their current kit and let our design team work it up.
Ready to kit out your cricket squad?
Send us your logo, colours and size breakdown. We will come back with a mock-up and a firm price — no obligation.